* [sup-talk] sent mail
@ 2010-04-06 14:13 Neil Stewart
2010-04-06 16:23 ` Michael Stapelberg
0 siblings, 1 reply; 10+ messages in thread
From: Neil Stewart @ 2010-04-06 14:13 UTC (permalink / raw)
To: sup-talk
I'm a new sup user. It is great. I'd like to ask what is the 'right way' to
set up my sent mail. I have a single mbox file sent-mail that contains many
messages from my pre-sup days. I'd like to add messages sent with sup to the
end of this file.
I've tried choosing this file with sup-config for storing my sent mail, but
sup crashes after the mail is sent without adding to the file (see
http://masanjin.net/sup-bugs/issue89).
I've tried linking ~/.sup/sent.mbox to sent-mail. Now sup doesn't crash and
it adds mail to sent-mail. But the sent mail appears in my inbox because it
has the inbox label.
Can anyone offer a few pointers on how to append sent mail to my existing
send-mail file, have the old sent mail in that file labeled as sent and
searchable, and not have sent messages appear in my inbox? All comments most
welcome.
Thank you,
Neil.
_______________________________________________
sup-talk mailing list
sup-talk@rubyforge.org
http://rubyforge.org/mailman/listinfo/sup-talk
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [sup-talk] sent mail
2010-04-06 14:13 [sup-talk] sent mail Neil Stewart
@ 2010-04-06 16:23 ` Michael Stapelberg
0 siblings, 0 replies; 10+ messages in thread
From: Michael Stapelberg @ 2010-04-06 16:23 UTC (permalink / raw)
To: sup-talk
Hi Neil,
Excerpts from Neil Stewart's message of 2010-04-06 16:13:43 +0200:
> messages from my pre-sup days. I'd like to add messages sent with sup to the
> end of this file.
Are you sure about that? mbox files can easily get very large and it’s a pain
to parse/handle them. I would really recommend maildir, you can use mb2md
to convert an existing mbox file to a maildir folder.
> it adds mail to sent-mail. But the sent mail appears in my inbox because it
> has the inbox label.
In sup 0.11, sent mail does not get the inbox label anymore (AFAIK). Are you
using 0.11?
Best regards,
Michael
_______________________________________________
sup-talk mailing list
sup-talk@rubyforge.org
http://rubyforge.org/mailman/listinfo/sup-talk
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [sup-talk] sent mail
@ 2010-04-08 10:08 Neil Stewart
2010-04-08 12:01 ` Richard Heycock
0 siblings, 1 reply; 10+ messages in thread
From: Neil Stewart @ 2010-04-08 10:08 UTC (permalink / raw)
To: sup-talk
Hi Michael,
> Are you sure about that? mbox files can easily get very large and it's a
> pain to parse/handle them. I would really recommend maildir, you can use
> mb2md to convert an existing mbox file to a maildir folder.
I shall give this a serious look. Thanks for the tip.
> In sup 0.11, sent mail does not get the inbox label anymore (AFAIK). Are you
> using 0.11?
I'm using 0.10.2-1 from Debian testing. I've had a go at getting 0.11, but
it's not available in Debian. I've failed to compile it several times using
"gems install sup". I finally got it to work using ruby1.9, but can't work
out how to run sup. I tried
# /var/lib/gems/1.9.0/bin/sup
/var/lib/gems/1.9.0/gems/sup-0.11/lib/sup/util.rb:2:in `require': /var/lib/gems/1.9.0/gems/lockfile-1.4.3/lib/lockfile.rb:454: syntax error, unexpected ']' (SyntaxError)
/var/lib/gems/1.9.0/gems/lockfile-1.4.3/lib/lockfile.rb:564: syntax error, unexpected $end, expecting keyword_end
from /var/lib/gems/1.9.0/gems/sup-0.11/lib/sup/util.rb:2:in `<top (required)>'
from /var/lib/gems/1.9.0/gems/sup-0.11/lib/sup.rb:277:in `require'
from /var/lib/gems/1.9.0/gems/sup-0.11/lib/sup.rb:277:in `<top (required)>'
from /var/lib/gems/1.9.0/gems/sup-0.11/bin/sup:15:in `require'
from /var/lib/gems/1.9.0/gems/sup-0.11/bin/sup:15:in `<top (required)>'
from /var/lib/gems/1.9.0/bin/sup:19:in `load'
from /var/lib/gems/1.9.0/bin/sup:19:in `<main>'
which fails and
# /var/lib/gems/1.9.0/gems/sup-0.11/bin/sup
/usr/bin/env: ruby: No such file or directory
which fails.
I was going to try rubyforge, but it only lists 0.10.2 and earlier.
Being new to ruby is not helping! I'll have a go at compiling the
development version from the git repository.
Thank you for your help.
Best,
Neil.
_______________________________________________
sup-talk mailing list
sup-talk@rubyforge.org
http://rubyforge.org/mailman/listinfo/sup-talk
^ permalink raw reply [flat|nested] 10+ messages in thread* Re: [sup-talk] sent mail
2010-04-08 10:08 Neil Stewart
@ 2010-04-08 12:01 ` Richard Heycock
2010-04-08 12:54 ` Neil Stewart
2010-04-08 21:44 ` Neil Stewart
0 siblings, 2 replies; 10+ messages in thread
From: Richard Heycock @ 2010-04-08 12:01 UTC (permalink / raw)
To: sup-talk
Excerpts from Neil Stewart's message of 2010-04-08 20:08:31 +1000:
> Hi Michael,
>
> > Are you sure about that? mbox files can easily get very large and it's a
> > pain to parse/handle them. I would really recommend maildir, you can use
> > mb2md to convert an existing mbox file to a maildir folder.
>
> I shall give this a serious look. Thanks for the tip.
>
> > In sup 0.11, sent mail does not get the inbox label anymore (AFAIK). Are you
> > using 0.11?
>
> I'm using 0.10.2-1 from Debian testing. I've had a go at getting 0.11, but
> it's not available in Debian. I've failed to compile it several times using
> "gems install sup". I finally got it to work using ruby1.9, but can't work
> out how to run sup. I tried
"gem install sup" will put a script in /usr/bin so you should be able to
simply type sup. If you have multiple versions of ruby you might have
problems but if you invoke it thus: /path/to/ruby /usr/bin/sup you
should be right.
> # /var/lib/gems/1.9.0/bin/sup
> /var/lib/gems/1.9.0/gems/sup-0.11/lib/sup/util.rb:2:in `require': /var/lib/gems/1.9.0/gems/lockfile-1.4.3/lib/lockfile.rb:454: syntax error, unexpected ']' (SyntaxError)
> /var/lib/gems/1.9.0/gems/lockfile-1.4.3/lib/lockfile.rb:564: syntax error, unexpected $end, expecting keyword_end
> from /var/lib/gems/1.9.0/gems/sup-0.11/lib/sup/util.rb:2:in `<top (required)>'
> from /var/lib/gems/1.9.0/gems/sup-0.11/lib/sup.rb:277:in `require'
> from /var/lib/gems/1.9.0/gems/sup-0.11/lib/sup.rb:277:in `<top (required)>'
> from /var/lib/gems/1.9.0/gems/sup-0.11/bin/sup:15:in `require'
> from /var/lib/gems/1.9.0/gems/sup-0.11/bin/sup:15:in `<top (required)>'
> from /var/lib/gems/1.9.0/bin/sup:19:in `load'
> from /var/lib/gems/1.9.0/bin/sup:19:in `<main>'
>
> which fails and
>
> # /var/lib/gems/1.9.0/gems/sup-0.11/bin/sup
> /usr/bin/env: ruby: No such file or directory
>
> which fails.
>
> I was going to try rubyforge, but it only lists 0.10.2 and earlier.
>
> Being new to ruby is not helping! I'll have a go at compiling the
> development version from the git repository.
>
> Thank you for your help.
>
> Best,
> Neil.
Not sure if this helps but you really don't want to be using ruby 1.9.0
the latest is ruby-1.9.1-p376. If you want to install using Debian
packages they are in testing.
apt-get install rubygems1.9.1 ruby1.9.1-dev rdoc1.9.1 irb1.9.1
should see you right.
rgh
--
Richard Heycock
http://topikality.com
+61 (0) 410 646 369
[e]: rgh@topikality.com
[im]: rgh@topikality.com
_______________________________________________
sup-talk mailing list
sup-talk@rubyforge.org
http://rubyforge.org/mailman/listinfo/sup-talk
^ permalink raw reply [flat|nested] 10+ messages in thread* Re: [sup-talk] sent mail
2010-04-08 12:01 ` Richard Heycock
@ 2010-04-08 12:54 ` Neil Stewart
2010-04-08 13:27 ` Richard Heycock
2010-04-08 21:44 ` Neil Stewart
1 sibling, 1 reply; 10+ messages in thread
From: Neil Stewart @ 2010-04-08 12:54 UTC (permalink / raw)
To: Richard Heycock; +Cc: sup-talk
Hi Richard,
> Not sure if this helps but you really don't want to be using ruby 1.9.0
> the latest is ruby-1.9.1-p376. If you want to install using Debian
> packages they are in testing.
>
> apt-get install rubygems1.9.1 ruby1.9.1-dev rdoc1.9.1 irb1.9.1
>
> should see you right.
Thanks for the pointers. I've got the right ruby packages now.
# dpkg -l | grep ruby
ii libreadline-ruby1.9.1 1.9.1.378-1 Readline interface for Ruby 1.9.1
ii libruby1.9.1 1.9.1.378-1 Libraries necessary to run Ruby 1.9.1
ii ruby1.9.1 1.9.1.378-1 Interpreter of object-oriented scripting lan
ii ruby1.9.1-dev 1.9.1.378-1 Header files for compiling extension modules
ii rubygems1.9.1 1.3.5-2 package management framework for Ruby librar
> "gem install sup" will put a script in /usr/bin so you should be able to
> simply type sup. If you have multiple versions of ruby you might have
> problems but if you invoke it thus: /path/to/ruby /usr/bin/sup you
> should be right.
"gem install sup" seems to be failing on ncurses.
# gem install sup
Building native extensions. This could take a while...
ERROR: Error installing sup:
ERROR: Failed to build gem native extension.
/usr/bin/ruby1.9.1 extconf.rb
checking for unistd.h... yes
checking for ncurses.h... yes
checking for wmove() in -lncurses... yes
checking for newscr()... yes
checking for TABSIZE()... yes
checking for ESCDELAY()... yes
checking for keybound()... yes
checking for curses_version()... yes
[SNIP]
checking for new_form() in -lform... yes
creating Makefile
make
Makefile:158: warning: overriding commands for target
`/var/lib/gems/1.9.1/gems/ncurses-0.9.1/lib'
Makefile:156: warning: ignoring old commands for target
`/var/lib/gems/1.9.1/gems/ncurses-0.9.1/lib'
cc -I. -I/usr/include/ruby-1.9.1/x86_64-linux
-I/usr/include/ruby-1.9.1/ruby/backward -I/usr/include/ruby-1.9.1 -I.
-DHAVE_UNISTD_H -DHAVE_NCURSES_H -DHAVE_NEWSCR -DHAVE_TABSIZE
-DHAVE_ESCDELAY -DHAVE_KEYBOUND -DHAVE_CURSES_VERSION -DHAVE_TIGETSTR
-DHAVE_GETWIN -DHAVE_PUTWIN -DHAVE_UNGETMOUSE -DHAVE_MOUSEMASK
-DHAVE_WENCLOSE -DHAVE_MOUSEINTERVAL -DHAVE_WMOUSE_TRAFO -DHAVE_MCPRINT
-DHAVE_HAS_KEY -DHAVE_DELSCREEN -DHAVE_DEFINE_KEY -DHAVE_KEYOK
-DHAVE_RESIZETERM -DHAVE_USE_DEFAULT_COLORS -DHAVE_USE_EXTENDED_NAMES
-DHAVE_WRESIZE -DHAVE_ATTR_ON -DHAVE_ATTR_OFF -DHAVE_ATTR_SET -DHAVE_CHGAT
-DHAVE_COLOR_SET -DHAVE_FILTER -DHAVE_INTRFLUSH -DHAVE_MVCHGAT
-DHAVE_MVHLINE -DHAVE_MVVLINE -DHAVE_MVWCHGAT -DHAVE_MVWHLINE
-DHAVE_MVWVLINE -DHAVE_NOQIFLUSH -DHAVE_PUTP -DHAVE_QIFLUSH -DHAVE_SCR_DUMP
-DHAVE_SCR_INIT -DHAVE_SCR_RESTORE -DHAVE_SCR_SET -DHAVE_SLK_ATTR
-DHAVE_SLK_ATTR_SET -DHAVE_SLK_COLOR -DHAVE_TIGETFLAG -DHAVE_TIGETNUM
-DHAVE_USE_ENV -DHAVE_VIDATTR -DHAVE_WATTR_ON -DHAVE_WATTR_OFF
-DHAVE_WATTR_SET -DHAVE_WCHGAT -DHAVE_WCOLOR_SET -DHAVE_GETATTRS
-DHAVE_ASSUME_DEFAULT_COLORS -DHAVE_ATTR_GET -DHAVE_PANEL_H -DHAVE_FORM_H
-fPIC -fno-strict-aliasing -g -g -O2 -O2 -g -Wall -Wno-parentheses -fPIC -g
-o form_wrap.o -c form_wrap.c
form_wrap.c: In function 'rbncurs_m_new_form':
form_wrap.c:395: error: 'struct RArray' has no member named 'len'
form_wrap.c: In function 'rbncurs_c_set_field_type':
form_wrap.c:619: error: 'struct RArray' has no member named 'len'
form_wrap.c: In function 'rbncurs_c_set_form_fields':
form_wrap.c:778: error: 'struct RArray' has no member named 'len'
form_wrap.c: In function 'make_arg':
form_wrap.c:1126: error: 'struct RArray' has no member named 'len'
make: *** [form_wrap.o] Error 1
Gem files will remain installed in /var/lib/gems/1.9.1/gems/ncurses-0.9.1
for inspection.
Results logged to /var/lib/gems/1.9.1/gems/ncurses-0.9.1/gem_make.out
I get pretty much identical output from "gem install ncurses", so I suspect
the problem is not even a sup issue. Am I doing something terribly wrong?
All comments most welcome.
Best,
Neil.
_______________________________________________
sup-talk mailing list
sup-talk@rubyforge.org
http://rubyforge.org/mailman/listinfo/sup-talk
^ permalink raw reply [flat|nested] 10+ messages in thread* Re: [sup-talk] sent mail
2010-04-08 12:54 ` Neil Stewart
@ 2010-04-08 13:27 ` Richard Heycock
[not found] ` <alpine.DEB.1.10.1004092231370.4476@stewart.warwick.ac.uk>
2010-04-09 22:09 ` Rich Lane
0 siblings, 2 replies; 10+ messages in thread
From: Richard Heycock @ 2010-04-08 13:27 UTC (permalink / raw)
To: sup-talk
Excerpts from Neil Stewart's message of 2010-04-08 22:54:01 +1000:
> Hi Richard,
>
> > Not sure if this helps but you really don't want to be using ruby 1.9.0
> > the latest is ruby-1.9.1-p376. If you want to install using Debian
> > packages they are in testing.
> >
> > apt-get install rubygems1.9.1 ruby1.9.1-dev rdoc1.9.1 irb1.9.1
> >
> > should see you right.
>
> Thanks for the pointers. I've got the right ruby packages now.
>
> # dpkg -l | grep ruby
> ii libreadline-ruby1.9.1 1.9.1.378-1 Readline interface for Ruby 1.9.1
> ii libruby1.9.1 1.9.1.378-1 Libraries necessary to run Ruby 1.9.1
> ii ruby1.9.1 1.9.1.378-1 Interpreter of object-oriented scripting lan
> ii ruby1.9.1-dev 1.9.1.378-1 Header files for compiling extension modules
> ii rubygems1.9.1 1.3.5-2 package management framework for Ruby librar
>
> > "gem install sup" will put a script in /usr/bin so you should be able to
> > simply type sup. If you have multiple versions of ruby you might have
> > problems but if you invoke it thus: /path/to/ruby /usr/bin/sup you
> > should be right.
>
> "gem install sup" seems to be failing on ncurses.
>
> # gem install sup
> Building native extensions. This could take a while...
> ERROR: Error installing sup:
> ERROR: Failed to build gem native extension.
>
> /usr/bin/ruby1.9.1 extconf.rb
> checking for unistd.h... yes
> checking for ncurses.h... yes
> checking for wmove() in -lncurses... yes
> checking for newscr()... yes
> checking for TABSIZE()... yes
> checking for ESCDELAY()... yes
> checking for keybound()... yes
> checking for curses_version()... yes
> [SNIP]
> checking for new_form() in -lform... yes
> creating Makefile
>
> make
> Makefile:158: warning: overriding commands for target
> `/var/lib/gems/1.9.1/gems/ncurses-0.9.1/lib'
> Makefile:156: warning: ignoring old commands for target
> `/var/lib/gems/1.9.1/gems/ncurses-0.9.1/lib'
> cc -I. -I/usr/include/ruby-1.9.1/x86_64-linux
> -I/usr/include/ruby-1.9.1/ruby/backward -I/usr/include/ruby-1.9.1 -I.
> -DHAVE_UNISTD_H -DHAVE_NCURSES_H -DHAVE_NEWSCR -DHAVE_TABSIZE
> -DHAVE_ESCDELAY -DHAVE_KEYBOUND -DHAVE_CURSES_VERSION -DHAVE_TIGETSTR
> -DHAVE_GETWIN -DHAVE_PUTWIN -DHAVE_UNGETMOUSE -DHAVE_MOUSEMASK
> -DHAVE_WENCLOSE -DHAVE_MOUSEINTERVAL -DHAVE_WMOUSE_TRAFO -DHAVE_MCPRINT
> -DHAVE_HAS_KEY -DHAVE_DELSCREEN -DHAVE_DEFINE_KEY -DHAVE_KEYOK
> -DHAVE_RESIZETERM -DHAVE_USE_DEFAULT_COLORS -DHAVE_USE_EXTENDED_NAMES
> -DHAVE_WRESIZE -DHAVE_ATTR_ON -DHAVE_ATTR_OFF -DHAVE_ATTR_SET -DHAVE_CHGAT
> -DHAVE_COLOR_SET -DHAVE_FILTER -DHAVE_INTRFLUSH -DHAVE_MVCHGAT
> -DHAVE_MVHLINE -DHAVE_MVVLINE -DHAVE_MVWCHGAT -DHAVE_MVWHLINE
> -DHAVE_MVWVLINE -DHAVE_NOQIFLUSH -DHAVE_PUTP -DHAVE_QIFLUSH -DHAVE_SCR_DUMP
> -DHAVE_SCR_INIT -DHAVE_SCR_RESTORE -DHAVE_SCR_SET -DHAVE_SLK_ATTR
> -DHAVE_SLK_ATTR_SET -DHAVE_SLK_COLOR -DHAVE_TIGETFLAG -DHAVE_TIGETNUM
> -DHAVE_USE_ENV -DHAVE_VIDATTR -DHAVE_WATTR_ON -DHAVE_WATTR_OFF
> -DHAVE_WATTR_SET -DHAVE_WCHGAT -DHAVE_WCOLOR_SET -DHAVE_GETATTRS
> -DHAVE_ASSUME_DEFAULT_COLORS -DHAVE_ATTR_GET -DHAVE_PANEL_H -DHAVE_FORM_H
> -fPIC -fno-strict-aliasing -g -g -O2 -O2 -g -Wall -Wno-parentheses -fPIC -g
> -o form_wrap.o -c form_wrap.c
> form_wrap.c: In function 'rbncurs_m_new_form':
> form_wrap.c:395: error: 'struct RArray' has no member named 'len'
> form_wrap.c: In function 'rbncurs_c_set_field_type':
> form_wrap.c:619: error: 'struct RArray' has no member named 'len'
> form_wrap.c: In function 'rbncurs_c_set_form_fields':
> form_wrap.c:778: error: 'struct RArray' has no member named 'len'
> form_wrap.c: In function 'make_arg':
> form_wrap.c:1126: error: 'struct RArray' has no member named 'len'
> make: *** [form_wrap.o] Error 1
>
>
> Gem files will remain installed in /var/lib/gems/1.9.1/gems/ncurses-0.9.1
> for inspection.
> Results logged to /var/lib/gems/1.9.1/gems/ncurses-0.9.1/gem_make.out
>
>
> I get pretty much identical output from "gem install ncurses", so I suspect
> the problem is not even a sup issue. Am I doing something terribly wrong?
> All comments most welcome.
You are right it's not a sup issue. Ruby ncurses hasn't been ported to
1.9 so I just used ncursesw which seems to work quite well. Since you
are using gem to install sup you will need to untar the gem file modify
the metadata, tar it all up and reinstall. Something along the lines of:
cd /var/lib/gems/1.9.1/gems/cache/
mkdir tmp; cd tmp
tar xf ../sup-0.11.gem (ignore any timestamp errors)
vi metadata (make sure you use vim which will deal with the compression)
tar cf ../sup-0.11.gem .
cd ..
gem install sup-0.11.gem
rm -r tmp (assuming it works)
If you have problems working out which line to change in the metadata
you could unzip it and apply the following patch:
--- metadata.old 2010-04-08 23:10:27.363603950 +1000
+++ metadata.new 2010-04-08 23:11:09.479559396 +1000
@@ -32,7 +32,7 @@
type: :runtime
version_requirements: *id001
- !ruby/object:Gem::Dependency
- name: ncurses
+ name: ncursesw
prerelease: false
requirement: &id002 !ruby/object:Gem::Requirement
requirements:
And that should do you.
Or you could download a modified gem from http://stuff.roughage.com.au/sup-0.11.gem.
That gem was built from git and works (on my machine!).
William, is there any reason you are using ncurses and not ncursesw?
rgh
> Best,
> Neil.
>
--
Richard Heycock
http://topikality.com
+61 (0) 410 646 369
[e]: rgh@topikality.com
[im]: rgh@topikality.com
_______________________________________________
sup-talk mailing list
sup-talk@rubyforge.org
http://rubyforge.org/mailman/listinfo/sup-talk
^ permalink raw reply [flat|nested] 10+ messages in thread[parent not found: <alpine.DEB.1.10.1004092231370.4476@stewart.warwick.ac.uk>]
* Re: [sup-talk] sent mail
[not found] ` <alpine.DEB.1.10.1004092231370.4476@stewart.warwick.ac.uk>
@ 2010-04-09 21:37 ` Neil Stewart
0 siblings, 0 replies; 10+ messages in thread
From: Neil Stewart @ 2010-04-09 21:37 UTC (permalink / raw)
To: sup-talk
Just a further note on the resolultion of the ncurses issue.
>>> "gem install sup" seems to be failing on ncurses.
>>>
>>> # gem install sup
>>> Building native extensions. This could take a while...
>>> ERROR: Error installing sup:
>>> ERROR: Failed to build gem native extension.
>>>
>>> /usr/bin/ruby1.9.1 extconf.rb
>>> checking for unistd.h... yes
>>> checking for ncurses.h... yes
>>> checking for wmove() in -lncurses... yes
>>> checking for newscr()... yes
>>> checking for TABSIZE()... yes
>>> checking for ESCDELAY()... yes
>>> checking for keybound()... yes
>>> checking for curses_version()... yes
>>> [SNIP]
>>> checking for new_form() in -lform... yes
>>> creating Makefile
>>>
>>> make
>>> Makefile:158: warning: overriding commands for target
>>> `/var/lib/gems/1.9.1/gems/ncurses-0.9.1/lib'
>>> Makefile:156: warning: ignoring old commands for target
>>> `/var/lib/gems/1.9.1/gems/ncurses-0.9.1/lib'
>>> cc -I. -I/usr/include/ruby-1.9.1/x86_64-linux
>>> -I/usr/include/ruby-1.9.1/ruby/backward -I/usr/include/ruby-1.9.1 -I.
>>> -DHAVE_UNISTD_H -DHAVE_NCURSES_H -DHAVE_NEWSCR -DHAVE_TABSIZE
>>> -DHAVE_ESCDELAY -DHAVE_KEYBOUND -DHAVE_CURSES_VERSION -DHAVE_TIGETSTR
>>> -DHAVE_GETWIN -DHAVE_PUTWIN -DHAVE_UNGETMOUSE -DHAVE_MOUSEMASK
>>> -DHAVE_WENCLOSE -DHAVE_MOUSEINTERVAL -DHAVE_WMOUSE_TRAFO -DHAVE_MCPRINT
>>> -DHAVE_HAS_KEY -DHAVE_DELSCREEN -DHAVE_DEFINE_KEY -DHAVE_KEYOK
>>> -DHAVE_RESIZETERM -DHAVE_USE_DEFAULT_COLORS -DHAVE_USE_EXTENDED_NAMES
>>> -DHAVE_WRESIZE -DHAVE_ATTR_ON -DHAVE_ATTR_OFF -DHAVE_ATTR_SET -DHAVE_CHGAT
>>> -DHAVE_COLOR_SET -DHAVE_FILTER -DHAVE_INTRFLUSH -DHAVE_MVCHGAT
>>> -DHAVE_MVHLINE -DHAVE_MVVLINE -DHAVE_MVWCHGAT -DHAVE_MVWHLINE
>>> -DHAVE_MVWVLINE -DHAVE_NOQIFLUSH -DHAVE_PUTP -DHAVE_QIFLUSH -DHAVE_SCR_DUMP
>>> -DHAVE_SCR_INIT -DHAVE_SCR_RESTORE -DHAVE_SCR_SET -DHAVE_SLK_ATTR
>>> -DHAVE_SLK_ATTR_SET -DHAVE_SLK_COLOR -DHAVE_TIGETFLAG -DHAVE_TIGETNUM
>>> -DHAVE_USE_ENV -DHAVE_VIDATTR -DHAVE_WATTR_ON -DHAVE_WATTR_OFF
>>> -DHAVE_WATTR_SET -DHAVE_WCHGAT -DHAVE_WCOLOR_SET -DHAVE_GETATTRS
>>> -DHAVE_ASSUME_DEFAULT_COLORS -DHAVE_ATTR_GET -DHAVE_PANEL_H -DHAVE_FORM_H
>>> -fPIC -fno-strict-aliasing -g -g -O2 -O2 -g -Wall -Wno-parentheses -fPIC -g
>>> -o form_wrap.o -c form_wrap.c
>>> form_wrap.c: In function 'rbncurs_m_new_form':
>>> form_wrap.c:395: error: 'struct RArray' has no member named 'len'
>>> form_wrap.c: In function 'rbncurs_c_set_field_type':
>>> form_wrap.c:619: error: 'struct RArray' has no member named 'len'
>>> form_wrap.c: In function 'rbncurs_c_set_form_fields':
>>> form_wrap.c:778: error: 'struct RArray' has no member named 'len'
>>> form_wrap.c: In function 'make_arg':
>>> form_wrap.c:1126: error: 'struct RArray' has no member named 'len'
>>> make: *** [form_wrap.o] Error 1
>>>
>>>
>>> Gem files will remain installed in /var/lib/gems/1.9.1/gems/ncurses-0.9.1
>>> for inspection.
>>> Results logged to /var/lib/gems/1.9.1/gems/ncurses-0.9.1/gem_make.out
>>>
>>>
>>> I get pretty much identical output from "gem install ncurses", so I suspect
>>> the problem is not even a sup issue. Am I doing something terribly wrong?
>>> All comments most welcome.
>>
>> You are right it's not a sup issue. Ruby ncurses hasn't been ported to
>> 1.9 so I just used ncursesw which seems to work quite well. Since you
>> are using gem to install sup you will need to untar the gem file modify
>> the metadata, tar it all up and reinstall. Something along the lines of:
>>
>> cd /var/lib/gems/1.9.1/gems/cache/
>> mkdir tmp; cd tmp
>> tar xf ../sup-0.11.gem (ignore any timestamp errors)
>> vi metadata (make sure you use vim which will deal with the compression)
>> tar cf ../sup-0.11.gem .
>> cd ..
>> gem install sup-0.11.gem
>> rm -r tmp (assuming it works)
>>
>> If you have problems working out which line to change in the metadata
>> you could unzip it and apply the following patch:
>>
>> --- metadata.old 2010-04-08 23:10:27.363603950 +1000
>> +++ metadata.new 2010-04-08 23:11:09.479559396 +1000
>> @@ -32,7 +32,7 @@
>> type: :runtime
>> version_requirements: *id001
>> - !ruby/object:Gem::Dependency
>> - name: ncurses
>> + name: ncursesw
>> prerelease: false
>> requirement: &id002 !ruby/object:Gem::Requirement
>> requirements:
>>
>> And that should do you.
>>
>> Or you could download a modified gem from http://stuff.roughage.com.au/sup-0.11.gem.
>> That gem was built from git and works (on my machine!).
>>
>> William, is there any reason you are using ncurses and not ncursesw?
I'm making my sup gem using ruby1.9.1 and the latest code from gitorious.
The code compiles a gem without complaint, but the gem doesn't install and
gives the above error. When the Rakefile is updated to refer to ncursesw not
ncurses, the gem compiles, installs, and runs without a problem.
Best,
Neil.
_______________________________________________
sup-talk mailing list
sup-talk@rubyforge.org
http://rubyforge.org/mailman/listinfo/sup-talk
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [sup-talk] sent mail
2010-04-08 13:27 ` Richard Heycock
[not found] ` <alpine.DEB.1.10.1004092231370.4476@stewart.warwick.ac.uk>
@ 2010-04-09 22:09 ` Rich Lane
2010-04-14 13:06 ` William Morgan
1 sibling, 1 reply; 10+ messages in thread
From: Rich Lane @ 2010-04-09 22:09 UTC (permalink / raw)
To: Richard Heycock; +Cc: sup-talk
I switched the dependency back to plain ncurses because ncursesw was
failing to compile on unusual platforms (because of its wide
characterness). I guess this calls for a ncurses-new gem based on the
same upstream code as ncursesw but without the wide character support.
_______________________________________________
sup-talk mailing list
sup-talk@rubyforge.org
http://rubyforge.org/mailman/listinfo/sup-talk
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [sup-talk] sent mail
2010-04-08 12:01 ` Richard Heycock
2010-04-08 12:54 ` Neil Stewart
@ 2010-04-08 21:44 ` Neil Stewart
1 sibling, 0 replies; 10+ messages in thread
From: Neil Stewart @ 2010-04-08 21:44 UTC (permalink / raw)
To: Richard Heycock; +Cc: sup-talk
[-- Attachment #1: Type: TEXT/PLAIN, Size: 1589 bytes --]
>>> In sup 0.11, sent mail does not get the inbox label anymore (AFAIK). Are you
>>> using 0.11?
>>
>> I'm using 0.10.2-1 from Debian testing. I've had a go at getting 0.11, but
>> it's not available in Debian. I've failed to compile it several times using
>> "gems install sup". I finally got it to work using ruby1.9, but can't work
>> out how to run sup. I tried
Here is some more information on sent mail appearing in the inbox. First, it
was discussed a while ago. Apologies for missing it.
http://www.mail-archive.com/sup-talk@rubyforge.org/msg03227.html
Second, I've downloaded the development sup from the gitorious.org and built and
installed a sup gem. Using this, sent mail does get the inbox tag and appear
in the inbox after sending. I've found that by changing line 52 in sent.rb
from
def labels; [:inbox, :sent]; end
to
def labels; [:sent]; end
this behaviour can be disabled, so sent mail goes straight into the archive
and is not included in the inbox.
I've not used ruby before, but I've added an option
:sent_appears_in_inbox: true
to config.yaml.
So the critical lines in sent.rb are now
if $config[:sent_appears_in_inbox] then
def labels; [:inbox, :sent]; end
else
def labels; [:sent]; end
and I added
:sent_appears_in_inbox => true
to the bit of sup.pl that writes the default config.yaml.
So the default is the current behaviour---sent appearing in the inbox, but
one can turn this off by altering the default config.yaml.
I've attached trivial patches for sup.rb and sent.rb if these are of any
use.
Best,
Neil.
[-- Attachment #2: Type: APPLICATION/x-ruby, Size: 350 bytes --]
[-- Attachment #3: Type: APPLICATION/x-ruby, Size: 343 bytes --]
[-- Attachment #4: Type: text/plain, Size: 140 bytes --]
_______________________________________________
sup-talk mailing list
sup-talk@rubyforge.org
http://rubyforge.org/mailman/listinfo/sup-talk
^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2010-04-14 13:12 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2010-04-06 14:13 [sup-talk] sent mail Neil Stewart
2010-04-06 16:23 ` Michael Stapelberg
2010-04-08 10:08 Neil Stewart
2010-04-08 12:01 ` Richard Heycock
2010-04-08 12:54 ` Neil Stewart
2010-04-08 13:27 ` Richard Heycock
[not found] ` <alpine.DEB.1.10.1004092231370.4476@stewart.warwick.ac.uk>
2010-04-09 21:37 ` Neil Stewart
2010-04-09 22:09 ` Rich Lane
2010-04-14 13:06 ` William Morgan
2010-04-08 21:44 ` Neil Stewart
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox