* [sup-talk] unread status
@ 2009-12-29 14:47 Philipp Überbacher
2009-12-29 22:53 ` William Morgan
0 siblings, 1 reply; 14+ messages in thread
From: Philipp Überbacher @ 2009-12-29 14:47 UTC (permalink / raw)
To: sup-talk
Hi,
during the last couple of days I managed to get sup up and running,
using ruby 1.8.7, xapian, msmtp and offlineimap.
Now that I use it I noticed strange behavior regarding unread messages.
It works like this:
New messages in the inbox, I read through them, hitting 'a'.
The messages vanish from the Inbox. So far so good.
I hit 'L' 'Enter' and notice that all messages I just read are listed as
unread. I navigate to unread, read the messages again and hit 'a'. Now
they aren't marked as unread anymore.
Also, when I read them in the inbox and they are still labeled unread
and I restart sup they aren't labeled unread anymore.
Well, expected behavior is to have them labeled read after I read them,
obviously.
I experienced something similar when I used the built-in imap support.
There it wouldn't really Poll when I hit P, new messages only showed up
after I restarted sup.
Either these are bugs or I don't get how sup works,
either way, help is appreciated.
Regards,
Philipp
_______________________________________________
sup-talk mailing list
sup-talk@rubyforge.org
http://rubyforge.org/mailman/listinfo/sup-talk
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [sup-talk] unread status
2009-12-29 14:47 [sup-talk] unread status Philipp Überbacher
@ 2009-12-29 22:53 ` William Morgan
2009-12-29 23:12 ` Philipp Überbacher
0 siblings, 1 reply; 14+ messages in thread
From: William Morgan @ 2009-12-29 22:53 UTC (permalink / raw)
To: sup-talk
Reformatted excerpts from Philipp Überbacher's message of 2009-12-29:
> I hit 'L' 'Enter' and notice that all messages I just read are listed as
> unread. I navigate to unread, read the messages again and hit 'a'. Now
> they aren't marked as unread anymore.
If you press "$" before hitting L, I think the counts will be correct.
An unhappy consequence of using explicit save, combined with the fact
that label-list-mode counts come from the index.
> I experienced something similar when I used the built-in imap support.
> There it wouldn't really Poll when I hit P, new messages only showed up
> after I restarted sup.
That sounds like a bug.
--
William <wmorgan-sup@masanjin.net>
_______________________________________________
sup-talk mailing list
sup-talk@rubyforge.org
http://rubyforge.org/mailman/listinfo/sup-talk
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [sup-talk] unread status
2009-12-29 22:53 ` William Morgan
@ 2009-12-29 23:12 ` Philipp Überbacher
2009-12-29 23:24 ` Tero Tilus
2009-12-29 23:33 ` William Morgan
0 siblings, 2 replies; 14+ messages in thread
From: Philipp Überbacher @ 2009-12-29 23:12 UTC (permalink / raw)
To: sup-talk
Excerpts from William Morgan's message of Tue Dec 29 23:53:54 +0100 2009:
> Reformatted excerpts from Philipp Überbacher's message of 2009-12-29:
> > I hit 'L' 'Enter' and notice that all messages I just read are listed as
> > unread. I navigate to unread, read the messages again and hit 'a'. Now
> > they aren't marked as unread anymore.
>
> If you press "$" before hitting L, I think the counts will be correct.
> An unhappy consequence of using explicit save, combined with the fact
> that label-list-mode counts come from the index.
Thanks, this seems to work. What's the reasoning behind explicit save?
_______________________________________________
sup-talk mailing list
sup-talk@rubyforge.org
http://rubyforge.org/mailman/listinfo/sup-talk
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [sup-talk] unread status
2009-12-29 23:12 ` Philipp Überbacher
@ 2009-12-29 23:24 ` Tero Tilus
2009-12-29 23:49 ` Rich Lane
2009-12-29 23:33 ` William Morgan
1 sibling, 1 reply; 14+ messages in thread
From: Tero Tilus @ 2009-12-29 23:24 UTC (permalink / raw)
To: sup-talk
Philipp Überbacher, 2009-12-30 01:12:
> Thanks, this seems to work. What's the reasoning behind explicit save?
I'd assume performance, but (at least with Xapian) it feels like a
non-issue. I'd like implicit save, or automatic save after every n
operations/seconds with $ to explicitly invoke save if the performance
really is an issue.
--
Tero Tilus ## 050 3635 235 ## http://tero.tilus.net/
_______________________________________________
sup-talk mailing list
sup-talk@rubyforge.org
http://rubyforge.org/mailman/listinfo/sup-talk
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [sup-talk] unread status
2009-12-29 23:12 ` Philipp Überbacher
2009-12-29 23:24 ` Tero Tilus
@ 2009-12-29 23:33 ` William Morgan
2009-12-29 23:54 ` Philipp Überbacher
1 sibling, 1 reply; 14+ messages in thread
From: William Morgan @ 2009-12-29 23:33 UTC (permalink / raw)
To: sup-talk
Reformatted excerpts from Philipp Überbacher's message of 2009-12-29:
> Thanks, this seems to work. What's the reasoning behind explicit save?
An accident of history. Will be gone at some point soon.
--
William <wmorgan-sup@masanjin.net>
_______________________________________________
sup-talk mailing list
sup-talk@rubyforge.org
http://rubyforge.org/mailman/listinfo/sup-talk
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [sup-talk] unread status
2009-12-29 23:24 ` Tero Tilus
@ 2009-12-29 23:49 ` Rich Lane
2009-12-29 23:54 ` William Morgan
0 siblings, 1 reply; 14+ messages in thread
From: Rich Lane @ 2009-12-29 23:49 UTC (permalink / raw)
To: Tero Tilus; +Cc: sup-talk
Excerpts from Tero Tilus's message of Tue Dec 29 18:24:09 -0500 2009:
> Philipp Überbacher, 2009-12-30 01:12:
> > Thanks, this seems to work. What's the reasoning behind explicit save?
>
> I'd assume performance, but (at least with Xapian) it feels like a
> non-issue. I'd like implicit save, or automatic save after every n
> operations/seconds with $ to explicitly invoke save if the performance
> really is an issue.
I have a patch that hasn't been merged yet that completely removes the
notion of saving with '$'. It's one of the branches I keep merged in to
the branch I actually use, so I tend to forget it's not upstream. I
should dust it off and resubmit. It will cause a UI-responsiveness
regression for ferret users, but if ferret is going to be deprecated in
the next release then I don't care too much.
_______________________________________________
sup-talk mailing list
sup-talk@rubyforge.org
http://rubyforge.org/mailman/listinfo/sup-talk
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [sup-talk] unread status
2009-12-29 23:33 ` William Morgan
@ 2009-12-29 23:54 ` Philipp Überbacher
0 siblings, 0 replies; 14+ messages in thread
From: Philipp Überbacher @ 2009-12-29 23:54 UTC (permalink / raw)
To: sup-talk
Excerpts from William Morgan's message of Wed Dec 30 00:33:07 +0100 2009:
> Reformatted excerpts from Philipp Überbacher's message of 2009-12-29:
> > Thanks, this seems to work. What's the reasoning behind explicit save?
>
> An accident of history. Will be gone at some point soon.
Ok, great if there's a good solution for this.
Regards,
Philipp
_______________________________________________
sup-talk mailing list
sup-talk@rubyforge.org
http://rubyforge.org/mailman/listinfo/sup-talk
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [sup-talk] unread status
2009-12-29 23:49 ` Rich Lane
@ 2009-12-29 23:54 ` William Morgan
2009-12-30 0:32 ` John Bent
0 siblings, 1 reply; 14+ messages in thread
From: William Morgan @ 2009-12-29 23:54 UTC (permalink / raw)
To: sup-talk
Reformatted excerpts from Rich Lane's message of 2009-12-29:
> I should dust it off and resubmit. It will cause a UI-responsiveness
> regression for ferret users, but if ferret is going to be deprecated
> in the next release then I don't care too much.
Please do. Encouraging Ferret users to switch is fine. :)
--
William <wmorgan-sup@masanjin.net>
_______________________________________________
sup-talk mailing list
sup-talk@rubyforge.org
http://rubyforge.org/mailman/listinfo/sup-talk
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [sup-talk] unread status
2009-12-29 23:54 ` William Morgan
@ 2009-12-30 0:32 ` John Bent
2010-01-03 22:22 ` William Morgan
0 siblings, 1 reply; 14+ messages in thread
From: John Bent @ 2009-12-30 0:32 UTC (permalink / raw)
To: sup-talk
Excerpts from William Morgan's message of Tue Dec 29 16:54:54 -0700 2009:
> Reformatted excerpts from Rich Lane's message of 2009-12-29:
> > I should dust it off and resubmit. It will cause a UI-responsiveness
> > regression for ferret users, but if ferret is going to be deprecated
> > in the next release then I don't care too much.
>
> Please do. Encouraging Ferret users to switch is fine. :)
>
I spent a couple of unsuccessful hours last week trying to switch.
Anyway else on an old PPC OS X who has been able to transition?
John
_______________________________________________
sup-talk mailing list
sup-talk@rubyforge.org
http://rubyforge.org/mailman/listinfo/sup-talk
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [sup-talk] unread status
2009-12-30 0:32 ` John Bent
@ 2010-01-03 22:22 ` William Morgan
2010-03-05 15:59 ` John Bent
0 siblings, 1 reply; 14+ messages in thread
From: William Morgan @ 2010-01-03 22:22 UTC (permalink / raw)
To: sup-talk
Reformatted excerpts from John Bent's message of 2009-12-29:
> I spent a couple of unsuccessful hours last week trying to switch.
> Anyway else on an old PPC OS X who has been able to transition?
Please try sup-convert-ferret-index in git next and report any problems.
--
William <wmorgan-sup@masanjin.net>
_______________________________________________
sup-talk mailing list
sup-talk@rubyforge.org
http://rubyforge.org/mailman/listinfo/sup-talk
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [sup-talk] unread status
2010-01-03 22:22 ` William Morgan
@ 2010-03-05 15:59 ` John Bent
2010-03-05 20:00 ` John Bent
0 siblings, 1 reply; 14+ messages in thread
From: John Bent @ 2010-03-05 15:59 UTC (permalink / raw)
To: sup-talk
Excerpts from William Morgan's message of Sun Jan 03 15:22:25 -0700
2010:
> Reformatted excerpts from John Bent's message of 2009-12-29:
> > I spent a couple of unsuccessful hours last week trying to switch.
> > Anyway else on an old PPC OS X who has been able to transition?
>
> Please try sup-convert-ferret-index in git next and report any
> problems.
>
Although, I have xapian-full install, when I run
sup-convert-ferret-index, I get this error:
guava:~>sup-convert-ferret-index
Error: you don't have the xapian gem installed, so this script won't do
much for you--`gem install xapian` (or xapian-full) first.
Try --help for help.
I do have xapian-full installed:
ROOT:guava:/Users/johnbent>gem install xapian-full
Building native extensions. This could take a while...
Successfully installed xapian-full-1.1.3.4
1 gem installed
Installing ri documentation for xapian-full-1.1.3.4...
Installing RDoc documentation for xapian-full-1.1.3.4...
But installing xapian (just itself) fails. Looks like I'm missing
glibc-devel library or something:
/bin/sh ../libtool --tag=CXX --mode=link g++ -fno-strict-aliasing
-Wall -Wno-unused -Wno-uninitialized -fvisibility=hidden
-I/opt/local/include -g -O2 -avoid-version -module -shrext ".bundle"
-o _xapian.la -rpath /opt/local/lib/ruby/site_ruby/1.8/i686-darwin10
xapian_wrap.lo /opt/local/lib/libxapian.la -lstdc++
g++ -shared -nostdlib
/usr/lib/gcc/i686-pc-linux-gnu/4.4.1/../../../crti.o
/usr/lib/gcc/i686-pc-linux-gnu/4.4.1/crtbeginS.o .libs/xapian_wrap.o
-Wl,--rpath -Wl,/opt/local/lib -Wl,--rpath -Wl,/opt/local/lib
/opt/local/lib/libxapian.dylib -L/opt/local/lib
-L/usr/lib/gcc/i686-pc-linux-gnu/4.4.1
-L/usr/lib/gcc/i686-pc-linux-gnu/4.4.1/../../.. -lstdc++ -lm -lc -lgcc_s
/usr/lib/gcc/i686-pc-linux-gnu/4.4.1/crtendS.o
/usr/lib/gcc/i686-pc-linux-gnu/4.4.1/../../../crtn.o -Wl,-soname
-Wl,_xapian.bundle -o .libs/_xapian.bundle
i686-apple-darwin10-g++-4.0.1:
/usr/lib/gcc/i686-pc-linux-gnu/4.4.1/../../../crti.o: No such file or
directory
i686-apple-darwin10-g++-4.0.1:
/usr/lib/gcc/i686-pc-linux-gnu/4.4.1/crtbeginS.o: No such file or
directory
i686-apple-darwin10-g++-4.0.1:
/usr/lib/gcc/i686-pc-linux-gnu/4.4.1/crtendS.o: No such file or
directory
i686-apple-darwin10-g++-4.0.1:
/usr/lib/gcc/i686-pc-linux-gnu/4.4.1/../../../crtn.o: No such file or
directory
make[4]: *** [_xapian.la] Error 1
make[3]: *** [all-recursive] Error 1
make[2]: *** [all] Error 2
make[1]: *** [all-recursive] Error 1
make: *** [all] Error 2
extconf.rb:3:in `system!': unhandled exception
from extconf.rb:6
Thanks,
John
_______________________________________________
sup-talk mailing list
sup-talk@rubyforge.org
http://rubyforge.org/mailman/listinfo/sup-talk
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [sup-talk] unread status
2010-03-05 15:59 ` John Bent
@ 2010-03-05 20:00 ` John Bent
2010-03-05 20:32 ` John Bent
0 siblings, 1 reply; 14+ messages in thread
From: John Bent @ 2010-03-05 20:00 UTC (permalink / raw)
To: sup-talk
Excerpts from John Bent's message of Fri Mar 05 08:59:42 -0700 2010:
> Excerpts from William Morgan's message of Sun Jan 03 15:22:25 -0700
> 2010:
> > Reformatted excerpts from John Bent's message of 2009-12-29:
> > > I spent a couple of unsuccessful hours last week trying to switch.
> > > Anyway else on an old PPC OS X who has been able to transition?
> >
> > Please try sup-convert-ferret-index in git next and report any
> > problems.
> >
> Although, I have xapian-full install, when I run
> sup-convert-ferret-index, I get this error:
>
> guava:~>sup-convert-ferret-index
> Error: you don't have the xapian gem installed, so this script won't do
> much for you--`gem install xapian` (or xapian-full) first.
> Try --help for help.
>
> I do have xapian-full installed:
>
Also, irb reports that I have xapian installed but I still get the error
from sup-convert-ferret-index:
1) irb says that I have xapian:
irb(main):001:0> require 'rubygems'
=> true
irb(main):002:0> require 'xapian'
=> true
irb(main):003:0> quit
2) gem list says that I have xapian:
*** LOCAL GEMS ***
ferret (0.11.6)
gettext (2.1.0)
highline (1.5.2)
locale (2.0.5)
lockfile (1.4.3)
mime-types (1.16)
ncursesw (1.2.4.1)
net-ssh (2.0.20)
rake (0.8.7)
rmail (1.0.0)
sup (0.10.2)
trollop (1.15)
xapian-full (1.1.3.4)
3) sup-convert-ferret-index says I don't have xapian:
guava:~>sup-convert-ferret-index --verbose
Error: you don't have the xapian gem installed, so this script won't do
much for you--`gem install xapian` (or xapian-full) first.
Try --help for help.
guava:~>sup-convert-ferret-index --version
sup-convert-ferret-index (sup 0.10.2)
4) ruby --version = 1.8.7 (2010-01-10 patchlevel 249) [i686-darwin10]
I tried port install ruby19 but the build failed:
'rb_dl_callback_double_19_0_stdcall' undeclared
Any ideas?
Thanks,
John
> ROOT:guava:/Users/johnbent>gem install xapian-full
> Building native extensions. This could take a while...
> Successfully installed xapian-full-1.1.3.4
> 1 gem installed
> Installing ri documentation for xapian-full-1.1.3.4...
> Installing RDoc documentation for xapian-full-1.1.3.4...
>
> But installing xapian (just itself) fails. Looks like I'm missing
> glibc-devel library or something:
>
> /bin/sh ../libtool --tag=CXX --mode=link g++ -fno-strict-aliasing
> -Wall -Wno-unused -Wno-uninitialized -fvisibility=hidden
> -I/opt/local/include -g -O2 -avoid-version -module -shrext ".bundle"
> -o _xapian.la -rpath /opt/local/lib/ruby/site_ruby/1.8/i686-darwin10
> xapian_wrap.lo /opt/local/lib/libxapian.la -lstdc++
> g++ -shared -nostdlib
> /usr/lib/gcc/i686-pc-linux-gnu/4.4.1/../../../crti.o
> /usr/lib/gcc/i686-pc-linux-gnu/4.4.1/crtbeginS.o .libs/xapian_wrap.o
> -Wl,--rpath -Wl,/opt/local/lib -Wl,--rpath -Wl,/opt/local/lib
> /opt/local/lib/libxapian.dylib -L/opt/local/lib
> -L/usr/lib/gcc/i686-pc-linux-gnu/4.4.1
> -L/usr/lib/gcc/i686-pc-linux-gnu/4.4.1/../../.. -lstdc++ -lm -lc -lgcc_s
> /usr/lib/gcc/i686-pc-linux-gnu/4.4.1/crtendS.o
> /usr/lib/gcc/i686-pc-linux-gnu/4.4.1/../../../crtn.o -Wl,-soname
> -Wl,_xapian.bundle -o .libs/_xapian.bundle
> i686-apple-darwin10-g++-4.0.1:
> /usr/lib/gcc/i686-pc-linux-gnu/4.4.1/../../../crti.o: No such file or
> directory
> i686-apple-darwin10-g++-4.0.1:
> /usr/lib/gcc/i686-pc-linux-gnu/4.4.1/crtbeginS.o: No such file or
> directory
> i686-apple-darwin10-g++-4.0.1:
> /usr/lib/gcc/i686-pc-linux-gnu/4.4.1/crtendS.o: No such file or
> directory
> i686-apple-darwin10-g++-4.0.1:
> /usr/lib/gcc/i686-pc-linux-gnu/4.4.1/../../../crtn.o: No such file or
> directory
> make[4]: *** [_xapian.la] Error 1
> make[3]: *** [all-recursive] Error 1
> make[2]: *** [all] Error 2
> make[1]: *** [all-recursive] Error 1
> make: *** [all] Error 2
> extconf.rb:3:in `system!': unhandled exception
> from extconf.rb:6
>
>
> Thanks,
>
> John
_______________________________________________
sup-talk mailing list
sup-talk@rubyforge.org
http://rubyforge.org/mailman/listinfo/sup-talk
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [sup-talk] unread status
2010-03-05 20:00 ` John Bent
@ 2010-03-05 20:32 ` John Bent
0 siblings, 0 replies; 14+ messages in thread
From: John Bent @ 2010-03-05 20:32 UTC (permalink / raw)
To: sup-talk
Excerpts from John Bent's message of Fri Mar 05 13:00:14 -0700 2010:
> Excerpts from John Bent's message of Fri Mar 05 08:59:42 -0700 2010:
> > Excerpts from William Morgan's message of Sun Jan 03 15:22:25 -0700
> > 2010:
> > > Reformatted excerpts from John Bent's message of 2009-12-29:
> > > > I spent a couple of unsuccessful hours last week trying to switch.
> > > > Anyway else on an old PPC OS X who has been able to transition?
> > >
> > > Please try sup-convert-ferret-index in git next and report any
> > > problems.
> > >
> > Although, I have xapian-full install, when I run
> > sup-convert-ferret-index, I get this error:
> >
> > guava:~>sup-convert-ferret-index
> > Error: you don't have the xapian gem installed, so this script won't do
> > much for you--`gem install xapian` (or xapian-full) first.
> > Try --help for help.
> >
> > I do have xapian-full installed:
> >
> Also, irb reports that I have xapian installed but I still get the error
> from sup-convert-ferret-index:
>
> 1) irb says that I have xapian:
> irb(main):001:0> require 'rubygems'
> => true
> irb(main):002:0> require 'xapian'
> => true
> irb(main):003:0> quit
>
>
> 2) gem list says that I have xapian:
> *** LOCAL GEMS ***
> ferret (0.11.6)
> gettext (2.1.0)
> highline (1.5.2)
> locale (2.0.5)
> lockfile (1.4.3)
> mime-types (1.16)
> ncursesw (1.2.4.1)
> net-ssh (2.0.20)
> rake (0.8.7)
> rmail (1.0.0)
> sup (0.10.2)
> trollop (1.15)
> xapian-full (1.1.3.4)
>
> 3) sup-convert-ferret-index says I don't have xapian:
> guava:~>sup-convert-ferret-index --verbose
> Error: you don't have the xapian gem installed, so this script won't do
> much for you--`gem install xapian` (or xapian-full) first.
> Try --help for help.
> guava:~>sup-convert-ferret-index --version
> sup-convert-ferret-index (sup 0.10.2)
>
> 4) ruby --version = 1.8.7 (2010-01-10 patchlevel 249) [i686-darwin10]
> I tried port install ruby19 but the build failed:
> 'rb_dl_callback_double_19_0_stdcall' undeclared
>
I tried commenting out the require xapian in sup-convert-ferret-index
but it still failed:
## Step three: build the Xapian index
/opt/local/lib/ruby/gems/1.8/gems/sup-0.10.2/bin/sup-sync --all
--all-sources --index xapian --restore /tmp/sup-state.txt
/opt/local/lib/ruby/gems/1.8/gems/sup-0.10.2/lib/sup/index.rb:229:in
`init': unknown index type "xapian":
dlopen(/opt/local/lib/ruby/gems/1.8/gems/xapian-full-1.1.3.4/lib/_xapian.bundle,
9): no suitable image found. Did find: (RuntimeError)
/opt/local/lib/ruby/gems/1.8/gems/xapian-full-1.1.3.4/lib/_xapian.bundle:
mach-o, but wrong architecture -
/opt/local/lib/ruby/gems/1.8/gems/xapian-full-1.1.3.4/lib/_xapian.bundle
from
/opt/local/lib/ruby/gems/1.8/gems/sup-0.10.2/bin/sup-sync:99
Shucks.
John
> Any ideas?
>
> Thanks,
>
> John
>
> > ROOT:guava:/Users/johnbent>gem install xapian-full
> > Building native extensions. This could take a while...
> > Successfully installed xapian-full-1.1.3.4
> > 1 gem installed
> > Installing ri documentation for xapian-full-1.1.3.4...
> > Installing RDoc documentation for xapian-full-1.1.3.4...
> >
> > But installing xapian (just itself) fails. Looks like I'm missing
> > glibc-devel library or something:
> >
> > /bin/sh ../libtool --tag=CXX --mode=link g++ -fno-strict-aliasing
> > -Wall -Wno-unused -Wno-uninitialized -fvisibility=hidden
> > -I/opt/local/include -g -O2 -avoid-version -module -shrext ".bundle"
> > -o _xapian.la -rpath /opt/local/lib/ruby/site_ruby/1.8/i686-darwin10
> > xapian_wrap.lo /opt/local/lib/libxapian.la -lstdc++
> > g++ -shared -nostdlib
> > /usr/lib/gcc/i686-pc-linux-gnu/4.4.1/../../../crti.o
> > /usr/lib/gcc/i686-pc-linux-gnu/4.4.1/crtbeginS.o .libs/xapian_wrap.o
> > -Wl,--rpath -Wl,/opt/local/lib -Wl,--rpath -Wl,/opt/local/lib
> > /opt/local/lib/libxapian.dylib -L/opt/local/lib
> > -L/usr/lib/gcc/i686-pc-linux-gnu/4.4.1
> > -L/usr/lib/gcc/i686-pc-linux-gnu/4.4.1/../../.. -lstdc++ -lm -lc -lgcc_s
> > /usr/lib/gcc/i686-pc-linux-gnu/4.4.1/crtendS.o
> > /usr/lib/gcc/i686-pc-linux-gnu/4.4.1/../../../crtn.o -Wl,-soname
> > -Wl,_xapian.bundle -o .libs/_xapian.bundle
> > i686-apple-darwin10-g++-4.0.1:
> > /usr/lib/gcc/i686-pc-linux-gnu/4.4.1/../../../crti.o: No such file or
> > directory
> > i686-apple-darwin10-g++-4.0.1:
> > /usr/lib/gcc/i686-pc-linux-gnu/4.4.1/crtbeginS.o: No such file or
> > directory
> > i686-apple-darwin10-g++-4.0.1:
> > /usr/lib/gcc/i686-pc-linux-gnu/4.4.1/crtendS.o: No such file or
> > directory
> > i686-apple-darwin10-g++-4.0.1:
> > /usr/lib/gcc/i686-pc-linux-gnu/4.4.1/../../../crtn.o: No such file or
> > directory
> > make[4]: *** [_xapian.la] Error 1
> > make[3]: *** [all-recursive] Error 1
> > make[2]: *** [all] Error 2
> > make[1]: *** [all-recursive] Error 1
> > make: *** [all] Error 2
> > extconf.rb:3:in `system!': unhandled exception
> > from extconf.rb:6
> >
> >
> > Thanks,
> >
> > John
_______________________________________________
sup-talk mailing list
sup-talk@rubyforge.org
http://rubyforge.org/mailman/listinfo/sup-talk
^ permalink raw reply [flat|nested] 14+ messages in thread
* [sup-talk] unread status
@ 2009-12-29 13:45 Philipp Überbacher
0 siblings, 0 replies; 14+ messages in thread
From: Philipp Überbacher @ 2009-12-29 13:45 UTC (permalink / raw)
To: sup-talk
Hi,
during the last couple of days I managed to get sup up and running,
using ruby 1.8.7, xapian, msmtp and offlineimap.
Now that I use it I noticed strange behavior regarding unread messages.
It works like this:
New messages in the inbox, I read through them, hitting 'a'.
The messages vanish from the Inbox. So far so good.
I hit 'L' 'Enter' and notice that all messages I just read are listed as
unread. I navigate to unread, read the messages again and hit 'a'. Now
they aren't marked as unread anymore.
Also, when I read them in the inbox and they are still labeled unread
and I restart sup they aren't labeled unread anymore.
Well, expected behavior is to have them labeled read after I read them,
obviously.
I experienced something similar when I used the built-in imap support.
There it wouldn't really Poll when I hit P, new messages only showed up
after I restarted sup.
Either these are bugs or I don't get how sup works,
either way, help is appreciated.
Regards,
Philipp
_______________________________________________
sup-talk mailing list
sup-talk@rubyforge.org
http://rubyforge.org/mailman/listinfo/sup-talk
^ permalink raw reply [flat|nested] 14+ messages in thread
end of thread, other threads:[~2010-03-05 20:35 UTC | newest]
Thread overview: 14+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2009-12-29 14:47 [sup-talk] unread status Philipp Überbacher
2009-12-29 22:53 ` William Morgan
2009-12-29 23:12 ` Philipp Überbacher
2009-12-29 23:24 ` Tero Tilus
2009-12-29 23:49 ` Rich Lane
2009-12-29 23:54 ` William Morgan
2009-12-30 0:32 ` John Bent
2010-01-03 22:22 ` William Morgan
2010-03-05 15:59 ` John Bent
2010-03-05 20:00 ` John Bent
2010-03-05 20:32 ` John Bent
2009-12-29 23:33 ` William Morgan
2009-12-29 23:54 ` Philipp Überbacher
-- strict thread matches above, loose matches on Subject: below --
2009-12-29 13:45 Philipp Überbacher
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox